retractable Banner Stands
Easy up, easy down. Storage built right into the unit. Easy to transport. Can be used over and over.
A great solution for tradeshows and conventions.
retractable mediascreen 1 bannerstand
wind spring

Easy to set up: Place the profile on the pole and then extend the pole to the desired height. it is very easy to attach the top bar on the pole thanks to a new fastener.

Easy to re-tension the spring mechanism

 

Sturdy Pole: Variable height adjustments.

Quick connect to top bar.

Slides into the foot for stability.

Holds the graphic straight up, rather than at a tilt.

 

Graphics Sizes: 33-7/16" and 39-3/8" wide.

The telescopic pole allows the height is adjust from 63" to 88 5/8" tall.

MediaScreen1 weighs 10 lbs.

Bag: Comes with a black, padded nylon bag for easy transport and storage.

Spotlight option: A halogen spotlight is available. It clamps to the pole behind the graphic and extends up
over the front to illuminate your message.


Double-sided option: Ask for MediaScreen 2.

 

Media Roll Retractable M2
wind springwind spring

Quick Change Rollers: You can swap the media rolls in and out of the retractable base. Great for updating seasonal displays or for traveling from one presentation to another.

Easier to work with than other retractable banner displays since the graphic is not under tension when retracted into the base. It only takes a minute to set up.

Cartridge

 

Updated with a newly designed telescopic pole and clamping top.

 

Keep extra roller kits on hand for the next time you need a display in a hurry.

Size: The graphic panel size is 33-7/16" wide. The telescopic pole allows the height to adjust from 63" to 88 5/8" tall.

Media Roll Retractable M2 weighs less than 12 lbs (5.4 kg) and is delivered in a practical nylon bag for easy transport and storage.

 

For Graphic Panels: Use polypropylene or polyester banner material.
Laminated materials are not recommended.

Oversized Retractable XL
XL large

The Oversized Retractable XL is extra wide and extra tall— Extra impressive when your message needs to be seen from a distance.

Pull the art out, tip the unit back so you can reach the top of the pole and connect. You're done.

The pole is collapsible into sections, so you can use it at 3 heights.

You can create a wall by linking two or more displays, thanks to a magnetic connector at the top.

magnet

 

 

 

 

The Retractable Oversized XL is delivered in a nylon bag for convenient carrying and storage.

 

Wall of Quickscreen 1 retractables
wind springwind spring

Smaller Version of the XL: If you want standard size retractables that connect to form a wall, this is the answer.

Pull the graphic up, and hook it into the top of the pole and you are done.

Graphics Sizes: Widths: 33-7/16" and 39-3/8"

Heights: 78 3/4" and 85 13/16"

Available Black or Silver.

Quickscreen 1 weighs approx. 11 lbs.

Bag: Comes with a black, padded nylon bag for easy transport and storage.

Spotlight option: A halogen spotlight is available. It clamps to the pole behind the graphic and extends up
over the front to illuminate your message


Double-sided option: Ask for QuickScreen 2.

 

If you want an image without a gap between edges, consider a pop-up wall or a few of our Classic Bannerstands with magnetic strips.